Like the title says Diode Dynamics SAE / FogLight Kit fir Jeep Gladiator with Steel Bumper. Swapped the LED Fog Lights in the Steel bumper for the Diode Dynamics fog light kit. The kit came with everything you need to install plus new Plug adapters to run the lights right off the factory switch no need to run a separate switch for this light kit!
Taking out the Fog Light is simple Unplug the clip on the back of the light then with a 10mm take out the two bolts holding the light in place.
Next you admire the great packaging Diode Dynamics does. Everything you need is in the box.
Next you need to add the brackets on to the new fog light. All you need is the provided bolts, washers and nuts then a Allen wrench and a 7mm socket to put everything together.
Last Step Install the light in to the bumper. You will reuse the two original 10mm bolts that held the factory light in place. Plug the provided plug adapter in then in the back of the light. Step back and enjoy your handy work! Then repeat on other side.
Before Shot of the Beam Pattern - Top Beam is Headlights Bottom Beam is Factory LED Fog Lights
After Shot of the Beam Pattern - Top Beam is Headlights Bottom Beam is Diode Dynamics SAE/Fog Light Kit
Here is a link to the lights on Diode Dynamics Site